I have a Xframe 88. the I have in stalled in a club. I have had it for 2 years. I replaced the power supply about 2 months in. and haven't had any issues with it since. Today i went to change s few settings mainly in my AUX/DJ input. I connected to it and changed the settings and tried to save to file and processor. It failed. I retried and failed again recompiled still failed. SO i powered down the unit tried again and it failed. I hit the upgrade the flash button and it wouldn't take the file i would get an error message and then PADAPU would shut down with a preset error. I am home now ad did not write the error code down. I could reload an older file and it would take it fine but if i modified the presets tie would not save and if i disconnected and reconnected it would revert to the previously saved settings. the error i get has some thing to do with mismatched presets. Any help would be appreciated. This has happened to me before with one of these and i ended up just starting from scratch and it worked. This is a big file so i don't really want to start from scratch again to give you an idea the processing power is at 99, 99,98,99. thank you again for any help.
Also if it helps I use 5 triggers for presets and 4 analog knobs for various volume controls for the dj and house stuff. Thank you. I will attach my file without the passwords if that might help. click on the blue box with my name when it opens.